implements a total frame assembly time statistic that measures the cumulative time between the arrival of the first packet of a frame (the lowest reception time) and the time all packets of the frame have been received (i.e. the highest reception time) This is similar to totalProcessingDelay https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-totalprocessingdelay in particular with respect to only being incremented for frames that are being decoded but does not include the amount of time spent decoding the frame. This statistic is useful for evaluating mechanisms like NACK and FEC and gives some insight into the behavior of the pacer sending the packets. Note that for frames with just a single packet the assembly time will be zero. In order to calculate an average assembly time an additional frames_assembled_from_multiple_packets counter for frames with more than a single packet is added. Currently this is a nonstandard stat so will only show up in webrtc-internals and not in getStats. Formally it can be defined as totalAssemblyTime of type double Only exists for video. The sum of the time, in seconds, each video frame takes from the time the first RTP packet is received (reception timestamp) and to the time the last RTP packet of a frame is received. Given the complexities involved, the time of arrival or the reception timestamp is measured as close to the network layer as possible. This metric is not incremented for frames that are not decoded, i.e., framesDropped, partialFramesLost or frames that fail decoding for other reasons (if any). Only incremented for frames consisting of more than one RTP packet. The average frame assembly time can be calculated by dividing the totalAssemblyTime with framesAssembledFromMultiplePacket. framesAssembledFromMultiplePacket of type unsigned long Only exists for video. It represents the total number of frames correctly decoded for this RTP stream that consist of more than one RTP packet. For such frames the totalAssemblyTime is incremented. BUG=webrtc:13986 Change-Id: Ie0ae431d72a57a0001c3240daba8eda35955f04e Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/260920 Reviewed-by: Harald Alvestrand <hta@webrtc.org> Reviewed-by: Henrik Boström <hbos@webrtc.org> Commit-Queue: Harald Alvestrand <hta@webrtc.org> Cr-Commit-Position: refs/heads/main@{#36922}
299 lines
10 KiB
C++
299 lines
10 KiB
C++
/*
|
|
* Copyright (c) 2013 The WebRTC project authors. All Rights Reserved.
|
|
*
|
|
* Use of this source code is governed by a BSD-style license
|
|
* that can be found in the LICENSE file in the root of the source
|
|
* tree. An additional intellectual property rights grant can be found
|
|
* in the file PATENTS. All contributing project authors may
|
|
* be found in the AUTHORS file in the root of the source tree.
|
|
*/
|
|
|
|
#ifndef CALL_VIDEO_RECEIVE_STREAM_H_
|
|
#define CALL_VIDEO_RECEIVE_STREAM_H_
|
|
|
|
#include <limits>
|
|
#include <map>
|
|
#include <set>
|
|
#include <string>
|
|
#include <utility>
|
|
#include <vector>
|
|
|
|
#include "api/call/transport.h"
|
|
#include "api/crypto/crypto_options.h"
|
|
#include "api/rtp_headers.h"
|
|
#include "api/rtp_parameters.h"
|
|
#include "api/video/recordable_encoded_frame.h"
|
|
#include "api/video/video_content_type.h"
|
|
#include "api/video/video_frame.h"
|
|
#include "api/video/video_sink_interface.h"
|
|
#include "api/video/video_timing.h"
|
|
#include "api/video_codecs/sdp_video_format.h"
|
|
#include "call/receive_stream.h"
|
|
#include "call/rtp_config.h"
|
|
#include "common_video/frame_counts.h"
|
|
#include "modules/rtp_rtcp/include/rtcp_statistics.h"
|
|
#include "modules/rtp_rtcp/include/rtp_rtcp_defines.h"
|
|
|
|
namespace webrtc {
|
|
|
|
class RtpPacketSinkInterface;
|
|
class VideoDecoderFactory;
|
|
|
|
class VideoReceiveStream : public MediaReceiveStream {
|
|
public:
|
|
// Class for handling moving in/out recording state.
|
|
struct RecordingState {
|
|
RecordingState() = default;
|
|
explicit RecordingState(
|
|
std::function<void(const RecordableEncodedFrame&)> callback)
|
|
: callback(std::move(callback)) {}
|
|
|
|
// Callback stored from the VideoReceiveStream. The VideoReceiveStream
|
|
// client should not interpret the attribute.
|
|
std::function<void(const RecordableEncodedFrame&)> callback;
|
|
// Memento of when a keyframe request was last sent. The VideoReceiveStream
|
|
// client should not interpret the attribute.
|
|
absl::optional<int64_t> last_keyframe_request_ms;
|
|
};
|
|
|
|
// TODO(mflodman) Move all these settings to VideoDecoder and move the
|
|
// declaration to common_types.h.
|
|
struct Decoder {
|
|
Decoder(SdpVideoFormat video_format, int payload_type);
|
|
Decoder();
|
|
Decoder(const Decoder&);
|
|
~Decoder();
|
|
|
|
bool operator==(const Decoder& other) const;
|
|
|
|
std::string ToString() const;
|
|
|
|
SdpVideoFormat video_format;
|
|
|
|
// Received RTP packets with this payload type will be sent to this decoder
|
|
// instance.
|
|
int payload_type = 0;
|
|
};
|
|
|
|
struct Stats {
|
|
Stats();
|
|
~Stats();
|
|
std::string ToString(int64_t time_ms) const;
|
|
|
|
int network_frame_rate = 0;
|
|
int decode_frame_rate = 0;
|
|
int render_frame_rate = 0;
|
|
uint32_t frames_rendered = 0;
|
|
|
|
// Decoder stats.
|
|
std::string decoder_implementation_name = "unknown";
|
|
FrameCounts frame_counts;
|
|
int decode_ms = 0;
|
|
int max_decode_ms = 0;
|
|
int current_delay_ms = 0;
|
|
int target_delay_ms = 0;
|
|
int jitter_buffer_ms = 0;
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcvideoreceiverstats-jitterbufferdelay
|
|
double jitter_buffer_delay_seconds = 0;
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcvideoreceiverstats-jitterbufferemittedcount
|
|
uint64_t jitter_buffer_emitted_count = 0;
|
|
int min_playout_delay_ms = 0;
|
|
int render_delay_ms = 10;
|
|
int64_t interframe_delay_max_ms = -1;
|
|
// Frames dropped due to decoding failures or if the system is too slow.
|
|
// https://www.w3.org/TR/webrtc-stats/#dom-rtcvideoreceiverstats-framesdropped
|
|
uint32_t frames_dropped = 0;
|
|
uint32_t frames_decoded = 0;
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-totaldecodetime
|
|
uint64_t total_decode_time_ms = 0;
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-totalprocessingdelay
|
|
webrtc::TimeDelta total_processing_delay = webrtc::TimeDelta::Millis(0);
|
|
// TODO(bugs.webrtc.org/13986): standardize
|
|
webrtc::TimeDelta total_assembly_time = webrtc::TimeDelta::Millis(0);
|
|
uint32_t frames_assembled_from_multiple_packets = 0;
|
|
// Total inter frame delay in seconds.
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-totalinterframedelay
|
|
double total_inter_frame_delay = 0;
|
|
// Total squared inter frame delay in seconds^2.
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-totalsqauredinterframedelay
|
|
double total_squared_inter_frame_delay = 0;
|
|
int64_t first_frame_received_to_decoded_ms = -1;
|
|
absl::optional<uint64_t> qp_sum;
|
|
|
|
int current_payload_type = -1;
|
|
|
|
int total_bitrate_bps = 0;
|
|
|
|
int width = 0;
|
|
int height = 0;
|
|
|
|
uint32_t freeze_count = 0;
|
|
uint32_t pause_count = 0;
|
|
uint32_t total_freezes_duration_ms = 0;
|
|
uint32_t total_pauses_duration_ms = 0;
|
|
uint32_t total_frames_duration_ms = 0;
|
|
double sum_squared_frame_durations = 0.0;
|
|
|
|
VideoContentType content_type = VideoContentType::UNSPECIFIED;
|
|
|
|
// https://w3c.github.io/webrtc-stats/#dom-rtcinboundrtpstreamstats-estimatedplayouttimestamp
|
|
absl::optional<int64_t> estimated_playout_ntp_timestamp_ms;
|
|
int sync_offset_ms = std::numeric_limits<int>::max();
|
|
|
|
uint32_t ssrc = 0;
|
|
std::string c_name;
|
|
RtpReceiveStats rtp_stats;
|
|
RtcpPacketTypeCounter rtcp_packet_type_counts;
|
|
|
|
// Timing frame info: all important timestamps for a full lifetime of a
|
|
// single 'timing frame'.
|
|
absl::optional<webrtc::TimingFrameInfo> timing_frame_info;
|
|
};
|
|
|
|
struct Config {
|
|
private:
|
|
// Access to the copy constructor is private to force use of the Copy()
|
|
// method for those exceptional cases where we do use it.
|
|
Config(const Config&);
|
|
|
|
public:
|
|
Config() = delete;
|
|
Config(Config&&);
|
|
Config(Transport* rtcp_send_transport,
|
|
VideoDecoderFactory* decoder_factory = nullptr);
|
|
Config& operator=(Config&&);
|
|
Config& operator=(const Config&) = delete;
|
|
~Config();
|
|
|
|
// Mostly used by tests. Avoid creating copies if you can.
|
|
Config Copy() const { return Config(*this); }
|
|
|
|
std::string ToString() const;
|
|
|
|
// Decoders for every payload that we can receive.
|
|
std::vector<Decoder> decoders;
|
|
|
|
// Ownership stays with WebrtcVideoEngine (delegated from PeerConnection).
|
|
VideoDecoderFactory* decoder_factory = nullptr;
|
|
|
|
// Receive-stream specific RTP settings.
|
|
struct Rtp : public ReceiveStreamRtpConfig {
|
|
Rtp();
|
|
Rtp(const Rtp&);
|
|
~Rtp();
|
|
std::string ToString() const;
|
|
|
|
// See NackConfig for description.
|
|
NackConfig nack;
|
|
|
|
// See RtcpMode for description.
|
|
RtcpMode rtcp_mode = RtcpMode::kCompound;
|
|
|
|
// Extended RTCP settings.
|
|
struct RtcpXr {
|
|
// True if RTCP Receiver Reference Time Report Block extension
|
|
// (RFC 3611) should be enabled.
|
|
bool receiver_reference_time_report = false;
|
|
} rtcp_xr;
|
|
|
|
// How to request keyframes from a remote sender. Applies only if lntf is
|
|
// disabled.
|
|
KeyFrameReqMethod keyframe_method = KeyFrameReqMethod::kPliRtcp;
|
|
|
|
// See LntfConfig for description.
|
|
LntfConfig lntf;
|
|
|
|
// Payload types for ULPFEC and RED, respectively.
|
|
int ulpfec_payload_type = -1;
|
|
int red_payload_type = -1;
|
|
|
|
// SSRC for retransmissions.
|
|
uint32_t rtx_ssrc = 0;
|
|
|
|
// Set if the stream is protected using FlexFEC.
|
|
bool protected_by_flexfec = false;
|
|
|
|
// Optional callback sink to support additional packet handlsers such as
|
|
// FlexFec.
|
|
RtpPacketSinkInterface* packet_sink_ = nullptr;
|
|
|
|
// Map from rtx payload type -> media payload type.
|
|
// For RTX to be enabled, both an SSRC and this mapping are needed.
|
|
std::map<int, int> rtx_associated_payload_types;
|
|
|
|
// Payload types that should be depacketized using raw depacketizer
|
|
// (payload header will not be parsed and must not be present, additional
|
|
// meta data is expected to be present in generic frame descriptor
|
|
// RTP header extension).
|
|
std::set<int> raw_payload_types;
|
|
} rtp;
|
|
|
|
// Transport for outgoing packets (RTCP).
|
|
Transport* rtcp_send_transport = nullptr;
|
|
|
|
// Must always be set.
|
|
rtc::VideoSinkInterface<VideoFrame>* renderer = nullptr;
|
|
|
|
// Expected delay needed by the renderer, i.e. the frame will be delivered
|
|
// this many milliseconds, if possible, earlier than the ideal render time.
|
|
int render_delay_ms = 10;
|
|
|
|
// If false, pass frames on to the renderer as soon as they are
|
|
// available.
|
|
bool enable_prerenderer_smoothing = true;
|
|
|
|
// Identifier for an A/V synchronization group. Empty string to disable.
|
|
// TODO(pbos): Synchronize streams in a sync group, not just video streams
|
|
// to one of the audio streams.
|
|
std::string sync_group;
|
|
|
|
// Target delay in milliseconds. A positive value indicates this stream is
|
|
// used for streaming instead of a real-time call.
|
|
int target_delay_ms = 0;
|
|
|
|
// An optional custom frame decryptor that allows the entire frame to be
|
|
// decrypted in whatever way the caller choses. This is not required by
|
|
// default.
|
|
rtc::scoped_refptr<webrtc::FrameDecryptorInterface> frame_decryptor;
|
|
|
|
// Per PeerConnection cryptography options.
|
|
CryptoOptions crypto_options;
|
|
|
|
rtc::scoped_refptr<webrtc::FrameTransformerInterface> frame_transformer;
|
|
};
|
|
|
|
// TODO(pbos): Add info on currently-received codec to Stats.
|
|
virtual Stats GetStats() const = 0;
|
|
|
|
// Sets a base minimum for the playout delay. Base minimum delay sets lower
|
|
// bound on minimum delay value determining lower bound on playout delay.
|
|
//
|
|
// Returns true if value was successfully set, false overwise.
|
|
virtual bool SetBaseMinimumPlayoutDelayMs(int delay_ms) = 0;
|
|
|
|
// Returns current value of base minimum delay in milliseconds.
|
|
virtual int GetBaseMinimumPlayoutDelayMs() const = 0;
|
|
|
|
// Sets and returns recording state. The old state is moved out
|
|
// of the video receive stream and returned to the caller, and `state`
|
|
// is moved in. If the state's callback is set, it will be called with
|
|
// recordable encoded frames as they arrive.
|
|
// If `generate_key_frame` is true, the method will generate a key frame.
|
|
// When the function returns, it's guaranteed that all old callouts
|
|
// to the returned callback has ceased.
|
|
// Note: the client should not interpret the returned state's attributes, but
|
|
// instead treat it as opaque data.
|
|
virtual RecordingState SetAndGetRecordingState(RecordingState state,
|
|
bool generate_key_frame) = 0;
|
|
|
|
// Cause eventual generation of a key frame from the sender.
|
|
virtual void GenerateKeyFrame() = 0;
|
|
|
|
protected:
|
|
virtual ~VideoReceiveStream() {}
|
|
};
|
|
|
|
} // namespace webrtc
|
|
|
|
#endif // CALL_VIDEO_RECEIVE_STREAM_H_
|